Price:
US$9.69

Free Shipping

Electric Drill Pump Mini Hand Self-priming Transfer Pump Diesel Oil Fluid Water

Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

  • Year:

    Select

    • Make:

      Select

      • Model:

        Select

        • Submodel:

          Select

          • Trim:

            Select

            • Engine:

              Select

              • Clear All
              This part is compatible with 0 vehicle(s).
              Show all compatible vehicles
              This part is compatible with 1 vehicle(s) matching
              This part is not compatible with
              Recent searches

                • Year
                • Make
                • Model
                • Submodel
                • Trim
                • Engine

                  Description:

                  This self priming drill pump is designed to work with a corded or cordless drill,fits most electric drills;Converts virtually any drill into a high capacity pump capable of emptying sinks,aquariums,pool skimmers and much more
                  Small size, light weight and portable,convenient installation;this electric drill powered pump is suitable for home, garden and outdoor
                  Ideal for transferring light liquids, such as fresh water, sea water, oil, dilute organic solvents, insecticides and liquid fertilisers
                  Engineering plastic body and stainless steel internal parts avoid corrosion
                  Self-priming up to 9ft(2.75m) and pumps water out to maximum distance of 45ft(13.7m);Pumps up to 300 U.S GPH(1136L/hr);Pump connects to 1/2inch(1.3cm) diameter tubing

                  Specification:

                  Material: Engineering plastics
                  Pump shank: 8mm round shank
                  Transmission medium: oil/water pump
                  Self-priming: 9ft
                  Impeller structure: Rubber impeller
                  Fitment: For electric drill
                   
                  Operation instruction :
                  1. To ensure optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use.
                  2. Be sure inlet hose is airtight and as short as possible. Inlet hose should not exceed 9ft (2.75M).
                  3. When pumping abrasive fluids or liquids with solids, longer pump life will be obtained by using a strainer on the inlet line.
                  4. It is recommended that the pump is mounted to a surface for security and ease of use.
                  5. Mount and start drill. Watch inlet tubing to be certain fluid is drawn into pump in15-20 seconds. If not, check that inlet tube is properly mounted to inlet.
                  6. Do not run dry. If pump fails to prime, check to be sure that hoses are not Kinked or clogged. Pump depends on fluid being pumped for lubrication.

                  NOTE: DO NOT run pump in reverse.

                  Package Included:

                  1 x Drill pump
                  2 x Hose clamps
                  2 x Connectors
                   

                  More Details:

                  Leave a Comment