Price:
US$102.99
- Brand: URUAV
- Camera Resolution: Analog
- Size: Tiny Whoop
- Version: PNP,BNF
- Voltage: 2S,3S
Precise details:
Frsky NON-EU RX / Caddx EOS2 Version
| Specification | |
| Brand name | URUAV |
| Item name | UR85 |
| Wheelbase | 85mm |
| Motor | Mode: 0805 KV9000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:5mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ10.5mm*17mm Weight(g):3.0g No.of Cells(Lipo):1S-3S |
| Camera | Caddx EOS2 1/3" CMOS Sensor 1200 TVL 2.1mm lens 16:9 Image size NTSC Global WDR Internal Synchronization |
| Flight controller | (Frsky version) CRAZYBEE F4FR PRO V2.0 Firmware target: CrazybeeF4FR (Flysky version) CRAZYBEE F4FS PRO V2.0 Firmware target: CrazybeeF4FS (DSM2/DSMX version) CRAZYBEE F4DX PRO V2.0 Firmware target: CrazybeeF4DX (No RX version) CRAZYBEE F4 PRO V2.0 Firmware target: CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-3S battery input (DC 3.5-13V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable) DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver No RX version need to add external Receiver Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A Buck / Boost with LC filter Built-in voltage detection |
| Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1-3S LiPo/LiPo HV (3.5v/13v) Current: 5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.He Default protocol: DSHOT600 |
| Frsky NON-EU receiver Version | SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
| VTX | Output power: 25~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready Weight: 3g |
| Lipo Battery | Capacity:300mAh Voltage:11.4v Continuous Discharge Rate: 40C Instantaneous discharge rate: 80C Size: 65mmx18mmx11mm Weight: 25g Connector: XT30 |
| Size | 112mm*112mm*60mm |
| Weight | 42g(without battery) |
| Weight | 67.4g(with Original 3s 300mah Lipo battery) |
Feature:
New Crazybee F4 PRO V2.0 AIO Flight controller 1-3s Lipo Compatible
2S for indoor Cine whoop mode
3S for outdoor Freestyle whoop mode
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
1102 brushless motor only 2.8g with double ball bearings
Powerful and smoothly
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
Camera Angle adjustable
VTX power switchable 25mw~200mw
Smartaudio ready , change VTX bands, powers, channels via OSD
Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
Full telemetry function ready (Frsky Non-EU and Flysky version support)
Real Bind and Fly version
Compatible both for 2s-3s Lipo/LIHV
Package Included:
UR85 FPV Racing Drone Version
1 x UR85 85mm Frame
1 x Crazybee F4FR V2.0 PRO FC built-in Frsky NON-EU RX
4 x 0805 KV9000 Motor
1 x 1.9inch propeller(4cw+4ccw)
1 x Caddx EOS2
1 x 5.8G 40ch 25mw-200mw VTX
1 x 3S 11.4v 300mah 40C/80C battery
1 x Propeller disassemble tool
1 x Screwdriver